Carton packing foam protection 1. Just like many mechanical equipment, first check whether each part is normal and intact, and whether there is electric shock leakage.
2. Check whether there is any foreign matter on the conveyor belt or inside the rotating barrel. If there is any foreign matter, it must be cleaned to avoid damage to the equipment.
3. Place the cutting machine on the horizontal ground or table before use, and make sure that the cutting machine is placed smoothly and reliably.
4. Make sure that the plug of the cutting machine is in good contact with no looseness or water mark.
5. When used, select the correct cutting mode according to the vegetables to be processed. The centrifugal slicer is suitable for slicing of various kinds of potato and melon hard dishes, while the vertical knife part is suitable for processing into blocks, cubes and diamonds of different specifications of leaf soft dishes or sliced pieces.
6. To install the vertical knife, rotate the adjustable eccentric wheel first to make the knife rest to the lower dead point, and then make the knife rest to lift up 1-2 mm. After the vertical knife is in contact with the conveyor belt, tighten nut to tighten the vertical knife on the knife rest. If the lifting height of the knife rest is too small, the vegetables may be combined with the knife. If the lifting height of the knife rest is too high, it may break the conveyor belt